5400L Series
3 models:
-
5400L5: 10 Hz to 5 MHz
-
5400L8 10 Hz to 8 MHz
-
5400L10: 10 Hz to 10 MHz
Overview
The 5400L Machine is a LCR Meter for high current test system. The DC Bias Current source WK3265B machines are connected to the Bias Adapter of the 5400 directly with a dedicated wiring system. This makes it is easier to set up and maintain the system.
Technical Specification
Frequency Range
5400L5: 10Hz to 5MHz
5400L8: 10Hz to 8MHz
5400L10: 10Hz to 10MHz
Frequency Resolution: ≦1mHz
AC Drive
AC Voltage Range: 10mV ~ 5Vrms
AC Voltage Resolution: <1% of setting
AC Current Range: 200uA ~ 200mArms
AC Current Resolution: <1% of setting
Automatic Level Control(ALC): ON or OFF
Source Resistance: Normal Mode : 50Ω ; Boost Mode : 25Ω
Maintains constant voltage or constant current at the Device Under Test
DC Resistance(Rdc)
DC Voltage Range: 10mV ~ 5V
DC Voltage Resolution: 1mV
DC Resistance Resolution: 10uΩ
Built-in DC Bias
Maximum current: Reserved temporarily
External DC bias
Maximum voltage: Reserved temporarily
External DC Bias Current using 3265B or 3265BQ* DC Bias Units
Maximum Current and Frequency:
-
300A at 500kHz
-
250A at 1MHz
-
50A at 3MHz*
DC Bias Current Resolution: 25mA
Options
Filmware:
1J5400OPG: Analysis Function (Graphs)
1J5400OPD: Data Logging. Measurement and results storing in real time
Internal Hardware:
1J5400DCBIASKIT: One interface board and cables to control 6 x 3265B DC Bias Units
/5B1: Bin Handler: Non-isolated 5V signals
/5B2: Bin Handler: Bin Handler: Isolated 24V signals
/5B3: Bin Handler: Universal optical coupling card
External Hardware:
1J1041: 300A High current two-wire DIP fixture
1J1031: High current two-wire SMD adaptor for 1J1041 fixture
1J1054: 1054 DIP fixture replacement (for 1054 supplied as standard with 5400)
Applications
​​Ideal for a broad spectrum of tasks including but not limited to:
-
High current inductance testing
-
Saturation current testing
-
AC parameter and DC resistance measurements
-
Comprehensive component characterization
Key Features
-
Versatile Testing Modes: Includes Meter Mode, MultiBias Mode, and Calibration Mode as standard, with an optional Graph Mode for comprehensive testing capabilities.
​
-
High Current Testing: External DC bias current source capability up to 250A/1MHz or 300A/500kHz, utilizing 10 or 12 x 3265B DC Bias Units for high current inductance testing.
​
-
Advanced Measurement Accuracy: Basic accuracy of 0.05% and measurement frequency range from 10Hz to 10MHz, ensuring precise and reliable results.
​
-
Simultaneous Parameter Measurement: Single trigger operation produces both AC parameter and DC Resistance measurements, displaying up to 4 different parameters at up to 3 different spot frequencies simultaneously.
​
-
Comprehensive Correction Features: Offers Open/Short Circuit Trims, HF Compensation, and Load Compensation in Boost/Normal mode for accuracy and stability.
​
-
Efficient Operation Interface: Features a user-friendly UI, allowing for simple setup and operation.
​
-
Saturation I(Sat) Testing: Capable of performing saturation current testing using curve sweeping or the MultiBias fast test mode.
​
-
Automatic Level Control (ALC): Maintains constant voltage or current at the Device Under Test for accurate measurements.
​
-
Flexible Connectivity: Remote control capabilities via GPIB, LAN, and USB interfaces for easy integration into existing test setups.
​
-
Energy-Saving Features: Smart switching mode automatically shuts down the 3265B bias source units when operating in Standalone Mode, conserving energy.
​
-
Upgradeable Software: Ensures the system remains up-to-date with the latest features and improvements. Technical support is readily available, fast, and convenient.
​
Additional Features
-
Wiring System: Simplifies setup and maintenance with a direct connection between the WK3265B machines and the Bias Adapter of the 5400.
​
-
Diagnostic Status Page: Provides real-time status of each 3265 DC Bias Unit connected to the system, enhancing system diagnostics and troubleshooting.​
​​