Products - Accessories
The Analyzers, LCR Meters, and DC Bias Models, Ohm meter, Interlayer Short Circuit Tester
Kelvin Clips (fine jaw)
The 40100 has fine-pointed jaws for tight spaces or fine wires. The 40150 is a cost-effective alternative for 4300 series LCR Meters, and the 40180 is a larger-jawed variant of the 40100.
SMD Tweezers
40125 HF SMD Tweezers are used to connect a Wayne Kerr 6500 analyzer to surface mount devices which have end cap terminations.
SMD Tweezers
The 40120 is a pair of chip component tweezers designed for contacting leadless devices, with the cable terminated by BNC connectors.
SMD probe leads with 1023
The 1905X is a 4-2 BNC converter plus lead with two sprung needle probes to access surface mounted devices on circuit boards and for interfacing to hybrid components and chip components on tape.
SMD probe leads
The 1905A lead with two sprung needle probes is used to access surface mounted devices on circuit boards and for interfacing to hybrid components and chip components on tape.
4 Terminal Lead
The 1EV1505 is a 600 mm extension cable terminated with four BNC connectors at the instrument end and four individual crocodile clips at the component end.
Protection Unit
The 1100 Protection Unit, designed for the 6430B or 6440B Component Analyzers, prevents damage to the test equipment by absorbing up to 25 Joules of energy and blowing a fuse in overload situations.
2 Terminal bottom contact SMD fixture
The 10362 is a 2-terminal bottom-contact SMD fixture that supports 250 A DC bias when used with the 3260 + 3265 system.
2 Terminal conventional fixture
The 1036 is a 2-terminal conventional fixture that can handle a 250A bias current. It can only be used with the 3260+3265 system.