logo
U.K. China Taiwan Home Site Map
About Us News ˛Product Support Contact Us
Product
Impedance Analyzers
line
spacer
Component Analyzers
line
spacer
Magnetics Analyzers
line
spacer
DC Bias Test Units
line
spacer
HF LCR Meters
line
spacer
LCR Meters
line
spacer
Telecom Test Units
line
spacer
Capacitance Meters
line
spacer
Accessories
line
spacer
spacer ad
ad4
Important Notices
img
icon Home icon Product iconCapacitance Analyzer img
Product
spacer
 
tableline
tableline
line
line Zoomin line
line
iconPrint
4330 Capacitance Meter news
line
Features
  • Comprehensive measurement functions including DC resistance (Optional)
  • 0.05% basic accuracy
  • Frequency ragnes: 100 Hz, 120 Hz, 1KHz, 10KHz, 100KHz, 1MHz
  • Fast measurement speed - up to 20 measurements per second
  • Drive level from 10mV to 2Vrms
  • Internal and external DC Voltage bias
  • RS-232 and USB interface
  • LCD Display, with easy-to-read characters
  • Protection against charged capacitors
  • Small size and light weight
line
Request for Quote PDF Download:Prod4330Series.pdf Information Request
tableline
tableline
tableline
tableline
4330 Capacitance Meter is specially designed for measuring the capacitors with the same comprehensive measurement functions as the popular 4300 series LCR Meters.
Accurate and fast measurements may be made in 1 kHz, 10 kHz, and 100 kHz making the 4330 the ideal choice for many applications in the test or production environments.
The 4330 model instrument may be externally controlled using the standard RS232 or GPIB interfaces.
Technical Specifications:
Measurement Function Any of the following parameters can be measured and displayed:
Impedance (Z)             Phase Angle (Ө)
Capacitance (C)           Dissipation Factor (D)
Inductance (L)             Quality Factor (Q)
AC Resistance (Rac)   Reactance (X)
Susceptance (B)          Conductance (G)
Admittance (Y)
Series/parallel equivalent circuit Any combination
Polar Form Z + Ө, Y + Ө
Frequency Range 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz, 1 MHz
Frequency Steps 6 steps
Drive Level(AC measurements) 10 mV - 2 V
DC Bias Voltage Internal - 2 Vdc
External - up to ±40V may be connected via rear panel
Measurement Speeds Four selectable speeds for all measurement functions
Up to 20 measurements per second depending on test frequency and setup condition
Measurement Ranges Z, R, X          0.01 mΩ to > 1 GΩ
Y, B, G          0.1 nS to > 2 kS
L                    1 nH to > 2 kH
C                    0.01 pF to > 1 F
D, Q               0.0001 to 9999.9
Phase Angle -180° to +180°
Rdc                0.1 mΩ to > 100 MΩ
Basic Accuracy (C): 0.05%
(D): 0.02%
Binning (Optional) User programmable PASS and FAIL bins. 25 way D-type interface connector.
Option /B1 (non-isolated) - Common 0V. Bin outputs 0 to 5V (nominal) with >10 mA current sink capability.
Option /B2 (isolated) - Common 24V input. Outputs 0 to 24V with >10 mA current source capability.
General Data:
Input Specification Power supply 90V AC to 264 V AC (Autoranging)
Mains frequency 47 Hz to 63 Hz
Display High contrast monochrome LCD module
320 x 240 with back lighting
Remote Control RS232 and GPIB (IEEE 488.2)
Measurement Connections 4 front panel BNC sockets
4-wire (Kelvin) measurements with screen at ground potential
BACK
tableline
tableline